How To Install Flex Strut Channel

Installing strut channels is a straightforward process that can be accomplished with basic tools. Here's a step-by-step guide:

Materials

• • Flex-Strut Channels
  • Strut Nuts & Bolts
  • Channel brackets
  • Power drill
  • Screwdriver
  • Level
  • Measuring Tape

1. Measure & Mark

Begin by measuring and marking the locations where the strut channels will be installed. Use a level to ensure accuracy.

2. Prepare the Channels

Cut the strut channels to the desired lengths using a saw. If needed, use a deburring tool to remove any sharp edges.

3. Mount Channel Brackets

Attach channel brackets to the mounting points using screws or bolts. Ensure that the brackets are securely fastened to the surface.

4. Attach the Strut Channels

Slide the strut channels into the channel brackets. Secure them in place using nuts and bolts, ensuring a tight fit.

5. Adjust and Level

Use a level to ensure that the strut channels are horizontally and vertically aligned. Make any necessary adjustments to achieve a level installation.

6. Secure Additional Components

Attach additional components such as conduit clamps, pipe hangers, or other fixtures to the strut channels using nuts and bolts.

7, Tighten Connections

Double-check all connections and tighten nuts and bolts as needed to ensure a secure and stable installation.