Sheets and Plates are large, thick, and flat metal pieces. They help carry out numerous metalworking processes, as we can cut, bend, or weld them into various shapes and sizes. We produce sheets in factories by operating perpetual sheets of metal through roll slitters.

Hastelloy C276 is a nickel-chromium-molybdenum superalloy. This alloy is helpful in corrosive and structural applications like flue gas desulfurization systems, bleaching vessels, heat exchangers, chemical storage tanks, etc. Its nickel content (more than 50%) is sufficient to make the surfaces harder and withstand stress in reducing environments.

Hastelloy 276 enhances the stability, toughness, and durability of these sheets and plates in extreme environments. It also contains lower silicon (0.08%) and carbon (0.01%) content that exhibits good fabrication and welding properties.

Mangalam Metal Corporation is one of the globally leading distributors and exporters of Hastelloy C276 Sheets and Plates. We use high-quality raw materials and high-tech machines to produce sheets and plates to meet national and international demands.

APPLICATIONS OF HASTELLOY C276 SHEETS AND PLATES

In the metal market, we often use the terms sheet, plates, and foils interchangeably. However, they are very different!

Alloy’s thicknesses are the only parameters that create the difference between sheets, plates, and foils. Let’s read further to understand their difference more precisely:

  • The thickness of the Foils is less than 0.20mm.
  • The thickness of the Sheets ranges from 0.55mm up to 6mm.
  • The thickness of the Plates is equal to 6mm and above.

We can connect these items by general welding, soldering, or brazing methods. Due to their excellent rigidity and strength, they will not lose the shape and connectivity of their holding parts. They retain intensity at higher temperature ranges.

Following are some major industries and their machinery, where you will find our Hastelloy Sheets & Plates used:

  • Floating Head Heat Exchangers
  • Vacuum Condensers
  • Boilers and Reboilers
  • Absorbers
  • Stabilizers
  • Lockwires
  • Exhaust Liners
  • Turbine Seals
  • Flame Holders
  • Combustion Cans
  • Soak/Floatation Tanks
  • Screening Separators
  • Pressure Vessels
  • Conveyors and Furnaces
  • Sorting Conveyors
  • Heat Exchangers
  • Hot Air Generators
  • Chemical Processing Equipment
  • Chemical Storage Tanks
GENERAL SPECIFICATIONS

SPECIFICATIONS

ASTM / ASME SB 424

THICKNESS

4mm-100mm

WIDTH

1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc

LENGTH

2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc

SURFACE

2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc

FINISH

Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

FORM

Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.

MANUFACTURER

POSCO, Aperam, Jindal Stainless, DKC Korea, Thyssenkrupp, Baosteel, TISCO, ArcelorMittal, VDM, Nippon Metal, Outokumpu

KEY PROPERTIES OF HASTELLOY C276 SHEETS AND PLATES
  • Hastelloy C276 exhibits high-yield tensile strength, ranging from 785 to 792Ha MPa. It strengthens these sheets and plates to undertake maximum load without being fractured or tempered.
  • Hastelloy C276 maintains oxidation resistance at high temperatures, ranging from cryogenic to 20120 F, protecting these sheets and plates against pitting and cracking corrosions.
  • Hastelloy C276 Sheets and Plates can withstand hydrogen fluoride gas in temperature areas ranging from 9320 F to 11120 F, which is approximately 50-times longer than any other alloys. 
  • Hastelloy C276 contains a significant amount of tungsten (3-4%) element, which exhibits low thermal expansion to these sheets and plates. It enables them to resist heat and pressure under extreme environments.
  • Hastelloy C276 alloys enhance the fabrication and weldability properties. We can install these sheets and plates in the industrial premises by standard welding or forging methods.
Markings and Packing

Product packaging serves to protect the products inside. Mangalam Metal Corporation effectively ensures all the products are deliverable to our clients securely. In the case of exports, we follow all international standard protocols of packaging.

Often, we export them in wooden cases. We mark our products with Grades, Lot Numbers, Size, Degree, and our Trademark. We also make custom markings on the products as per the requirements of our clients.

Quality Assurance

At Mangalam Metal Corporation, all products are subject to strict supervision at each production chain, right from purchasing the raw materials to dispatching products. All the processes undergo inspections for conformity to ASTM, ASME, MSS, and JIS codes and standards.

Our Presence

Mumbai, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Delhi, Kolkata, Chennai, Bengaluru, Hyderabad, Ahmadabad, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Srinagar, Jabalpur, Asansol, Vasai Virar City, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Ranchi, Raipur, Kollam, Gwalior, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota.
Spain, Sweden, Switzerland, Saudi Arabia, Singapore, South Korea, South Africa, Afghanistan, Albania, Andorra, Austria, Bahrain, Bangladesh, Bhutan, Brunei, Belarus, Belgium, Bulgaria, Cambodia, China, Cyprus, Croatia, Czech Republic, Denmark, Estonia, Egypt, Finland, France, Germany, Greece, Georgia, Hungary, Iceland, Ireland, Italy, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Kazakhstan, Kuwait, Kyrgyzstan, Lebanon, Latvia, Latin America, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Monaco, Malaysia, Maldives, Mongolia, Myanmar (Burma), Nepal, North Korea, Netherlands, Norway, Oman, Poland, Portugal, Pakistan, Palestine, Philippines, Qatar, Russia, Romania, Russia, San Marino, Serbia and Montenegro, Slovakia, Slovenia, Sri Lanka, Syria, Taiwan, Tanzania, Tajikistan, Thailand, Turkey, Turkmenistan, Ukraine, United Kingdom, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen.

Get Free Quote

    This will close in 0 seconds

    Open chat