Round Bars are non-hollow cylindrical rods useful to carry out numerous industrial applications. These round bars help provide structural support to machinery, automobile parts, railway engines, coaches, etc. These bars are available in various sizes ranging from 10 mm to 125 mm.

Incoloy 925 is a nickel-ferrous-chromium alloy. This alloy is available in various grades that emphasize resisting pitting and crevice corrosions in hot and cold temperature areas. Also, it contains higher iron content, which makes the surface hard and embrittlement in hostile environments.

Incoloy 925 enhances the toughness, rigidity, and durability of the round bars in various industrial applications. It exhibits high-yield tensile strength, which helps to undertake maximum load during the heat-generating process.

Mangalam Metal Corporation uses high-quality raw materials to manufacture Incoloy 925 Round Bars to meet national and international standards. All our products undergo inspections for conformity to ASTM, ASME, MSS, and JIS codes and standards.

APPLICATIONS OF INCOLOY 925 ROUND BARS

The quality and performance of Incoloy 925 round bars depend upon three primary factors:

  • Quality of the raw materials
  • Quality of the rolling machines to give uniform shapes and sizes
  • Quality system for quenching and tempering.

Incoloy 925 is highly versatile and beneficial in numerous industrial applications. It exhibits high-yield strength up to 810 MPa at room temperature areas, which helps the round bars to withstand stress without any permanent deformations.

Following are some industries and their applications where you will find our Incoloy 925 Round Bars installed.

  • Helix Type Heat Exchangers
  • Vacuum Condensers
  • Evaporators
  • Air Coolers
  • Rectification Columns
  • Heat Exchangers
  • instrumentation Components
  • Flame Holders
  • Aerospace Liners
  • Transition Ducts
  • Ultra-Low Temperature Freezers
  • IVF Workstations
  • Laboratory Incubators
  • Rodent Incubators
  • Centrifuge Machinery
  • Drum Blenders
  • Cutter Mixers
  • High Shear Mixers
  • Colloid Mills
  • Bread Molders
GENERAL SPECIFICATIONS

SPECIFICATIONS

ASTM B805 / ASTM SB805

DIMENSIONS

EN, DIN, JIS, ASTM, BS, ASME, AISI

SIZE

5 mm To 500 mm

DIAMETER

0.1 mm to 100 mm

LENGTH

100 mm To 3000 mm Long & Above

FINISH

Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish

TOLERANCE

H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements

FORM

Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

STEPS TO MAKE INCOLOY 925 ROUND BARS

Based on our knowledge and expertise, we are providing you three basic steps we use to produce Incoloy Round Bars:

Step 1: Incoloy Making Process

First, we need to take nickel, chromium, iron, molybdenum, and other chemical compositions of Incoloy 925 into a blast furnace and melt them. The resulting molted Incoloy will form as an ingot casting. 

Step 2: Primary and Secondary Incoloy Making Process

Usually, these Incoloy ingots contain almost 10% of impurities like carbons, which must be eliminated. To do so, we use the Electric Ark Furnace (EAF) method. Under this method, we heat the molten iron ingot at a temperature of 1650-Degree C to remove the impurities up to maximum level and convert it into a high-grade variant.

Onwards, this refined molten iron undergoes supplementary processes, including degassing, steering, or argon bubbling to adjust itself with other Incoloy compositions.

Step 3: Casting

After finishing Step 2, the molten Incoloy needs to cool down to form solid molds. Once cooled, we can cut them into our desired lengths depending upon the application. Further, the products are hot rolled in the Rolling Mills to achieve our desired shapes or sizes.

Markings and Packing

Product packaging serves to protect the products inside. Mangalam Metal Corporation effectively ensures all the products are deliverable to our clients securely. In the case of exports, we follow all international standard protocols of packaging.

Often, we export them in wooden cases. We mark our products with Grades, Lot Numbers, Size, Degree, and our Trademark. We also make custom markings on the products as per the requirements of our clients.

Quality Assurance

At Mangalam Metal Corporation, all products are subject to strict supervision at each production chain, right from purchasing the raw materials to dispatching products. All the processes undergo inspections for conformity to ASTM, ASME, MSS, and JIS codes and standards.

Our Presence

Mumbai, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Delhi, Kolkata, Chennai, Bengaluru, Hyderabad, Ahmadabad, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Srinagar, Jabalpur, Asansol, Vasai Virar City, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Ranchi, Raipur, Kollam, Gwalior, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota.
Spain, Sweden, Switzerland, Saudi Arabia, Singapore, South Korea, South Africa, Afghanistan, Albania, Andorra, Austria, Bahrain, Bangladesh, Bhutan, Brunei, Belarus, Belgium, Bulgaria, Cambodia, China, Cyprus, Croatia, Czech Republic, Denmark, Estonia, Egypt, Finland, France, Germany, Greece, Georgia, Hungary, Iceland, Ireland, Italy, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Kazakhstan, Kuwait, Kyrgyzstan, Lebanon, Latvia, Latin America, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Monaco, Malaysia, Maldives, Mongolia, Myanmar (Burma), Nepal, North Korea, Netherlands, Norway, Oman, Poland, Portugal, Pakistan, Palestine, Philippines, Qatar, Russia, Romania, Russia, San Marino, Serbia and Montenegro, Slovakia, Slovenia, Sri Lanka, Syria, Taiwan, Tanzania, Tajikistan, Thailand, Turkey, Turkmenistan, Ukraine, United Kingdom, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen.

Get Free Quote

    This will close in 0 seconds

    Open chat