Sheets and Plates are highly versatile. Sheets are the primary products in the metal industry and helpful in numerous engineering applications. Depending upon the nature and scope of work, we can cut or bend them in different shapes and sizes. While plates are mostly serviceable in the aviation and transportation industry, sheets are helpful to produce cans and closures.

Incoloy 925 is a nickel-chromium-iron alloy. It provides excellent oxidation-corrosion-resistance to the surfaces at extreme temperature areas. It is also resistant to carbonization in elevated temperature areas, thus, strongly recommended in ethylene and olefins plants.

Incoloy 925 enhances the integrity, toughness, and durability of the sheets and plates. Incoloy 925 Sheets and Plates provides good creep-rupture and high-yield tensile strength in annealed conditions.

Mangalam Metal Corporation offers an exclusive range of Incoloy 925 Sheets and Plates to our clients across the globe. We use only high-quality raw materials to produce sheets and plates to meet national and international demands.

APPLICATIONS OF INCOLOY 925 SHEETS AND PLATES

In the metal market, we often use the terms ‘sheets’ and ‘plates’ interchangeably. However, they are slightly different due to their thickness.

The thickness of the sheet ranges from 0.006 inches to 0.25 inches. On the other hand, plates have a thickness of more than or equivalent to 0.25 inches.

We use rolling machines to manufacture Incoloy 925 Plates. Under immense pressure, we pass Incoloy 925 in-between the rolls to make it thinner and longer. The ingot is preheated first to the rolling temperature and maintained into the breakdown mil. We need to repeat these steps until the thickness is reduced as per our requirements.

We can use cold-rolled or heat treatment to increase the strength and durability of the slabs. Further, we place them in a safer area to cool themselves. It helps them to develop toughness and corrosion resistance. 

Following are some industries and their applications where you will find our Incoloy 925 Sheets and Pipes installed.

  • Gas Turbine Rotors
  • Transition Ducts
  • Heat Exchangers
  • Instrumentation Components
  • Combustion Cans
  • Storage Racks
  • Paint Pumps
  • Shipyard Guns
  • Shipyard Vacuum Systems
  • Shipyard Bending Machines
  • Demethanizer
  • Depropanizers
  • C3 Neutralizer
  • Reboilers
  • Surface Condenser
  • Boilers and Reboilers
  • Thermosyphon Evaporators
  • Refrigerant Condensers
  • Vacuum Condensers
  • Regenerative Air Coolers
GENERAL SPECIFICATIONS

SPECIFICATIONS

ASTM / ASME SB 168

THICKNESS

4mm-100mm

WIDTH

1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc

LENGTH

2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc

SURFACE

2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc

FINISH

Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

FORM

Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.

MANUFACTURERS

POSCO, Aperam, Jindal Stainless, DKC Korea, Thyssenkrupp, Baosteel, TISCO, ArcelorMittal, VDM, Nippon Metal, Outokumpu.

KEY PROPERTIES OF INCOLOY 925 SHEETS AND PLATES

  • Incoloy 925 contains nickel, chromium, and iron with the addition of molybdenum. Thus, it provides resistance from stress-corrosion crackings to the sheets and plates that helps to resist higher pressure in hostile environments.
  • Incoloy 925 provides good fatigue resistance, which helps the sheets and plates to resist heat in elevated temperature areas.
  • Incoloy 925 offers high-yield tensile strength and toughness, making the sheets hard and brittle in elevated temperature areas.
  • Incoloy 925 contains higher ferrous content. Thus, these sheets and plates do not rust or shrink placidly. Also, it maintains low-temperature notch toughness and cracks propagation resistance.
Markings and Packing

Product packaging serves to protect the products inside. Mangalam Metal Corporation effectively ensures all the products are deliverable to our clients securely. In the case of exports, we follow all international standard protocols of packaging.

Often, we export them in wooden cases. We mark our products with Grades, Lot Numbers, Size, Degree, and our Trademark. We also make custom markings on the products as per the requirements of our clients.

Quality Assurance

At Mangalam Metal Corporation, all products are subject to strict supervision at each production chain, right from purchasing the raw materials to dispatching products. All the processes undergo inspections for conformity to ASTM, ASME, MSS, and JIS codes and standards.

Our Presence

Mumbai, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Delhi, Kolkata, Chennai, Bengaluru, Hyderabad, Ahmadabad, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Srinagar, Jabalpur, Asansol, Vasai Virar City, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Ranchi, Raipur, Kollam, Gwalior, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota.
Spain, Sweden, Switzerland, Saudi Arabia, Singapore, South Korea, South Africa, Afghanistan, Albania, Andorra, Austria, Bahrain, Bangladesh, Bhutan, Brunei, Belarus, Belgium, Bulgaria, Cambodia, China, Cyprus, Croatia, Czech Republic, Denmark, Estonia, Egypt, Finland, France, Germany, Greece, Georgia, Hungary, Iceland, Ireland, Italy, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Kazakhstan, Kuwait, Kyrgyzstan, Lebanon, Latvia, Latin America, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Monaco, Malaysia, Maldives, Mongolia, Myanmar (Burma), Nepal, North Korea, Netherlands, Norway, Oman, Poland, Portugal, Pakistan, Palestine, Philippines, Qatar, Russia, Romania, Russia, San Marino, Serbia and Montenegro, Slovakia, Slovenia, Sri Lanka, Syria, Taiwan, Tanzania, Tajikistan, Thailand, Turkey, Turkmenistan, Ukraine, United Kingdom, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen.

Get Free Quote

    This will close in 0 seconds

    Open chat