Sheets and Plates are technically large, thick, and flat metal pieces.

They are helpful in numerous metalworking processes, as we can cut, bend, or weld them into various shapes and sizes. We produce sheets in factories by operating perpetual sheets of metal through roll slitters.

Monel 400 is a nickel-copper in which 67% nickel and 23% copper are in formation. The nickel-copper-formed elements provide resistance to seawater and high-temperature streams. However, nickel alloy is resistant to hydrochloric and hydrofluoric acids when they are de-aerated.

The Monel 400 safeguards the sheets and plates from corrosion, brackish water, and seawater. It adds factors to characterize with good strength and weldability. Also, Monel 400 contains additional elements, including manganese, silicon, and iron, making these sheets and plates strong enough to work in elevated temperature areas and fight corrosion.

Mangalam Metal Corporation offers an exclusive range of Monel 400 Sheets and Plates to clients across the globe. We use high-quality raw materials and high-tech machinery to manufacture sheets and plates to meet national and international demands.

APPLICATIONS OF MONEL 400 SHEETS AND PLATES

In the metal industry, we use the term ‘sheets’ and ‘plates’ interchangeably. However, they are different from one another!

Although they exhibit the same mechanical and chemical properties, they are distinct due to their thickness. The thickness of alloy sheets ranges from 0.5 mm to 6.0 mm, while alloy plate thickness ranges more than 6 mm.

We use rolling machines to manufacture Monel 400 Plates. Under immense pressure, we pass Monel 400 in-between the rolls to make it thinner and longer. The ingot is preheated first to the rolling temperature and maintained into the breakdown mil. We need to repeat these steps until the thickness is reduced as per our requirements.

We can use cold-rolled or heat treatment to increase the strength and durability of the slabs. Further, we place them in a safer area to cool themselves. It helps them to develop toughness and corrosion resistance.

Following are some industries and their applications where you will find our Monel 400 Sheets and Plates installed.

  • Helix Type Heat Exchangers
  • Vacuum Condensers
  • Evaporators
  • Horizontal and Vertical Vessels for Liquid Media
  • Adsorbers
  • Heat Exchangers
  • Centrifugal Machines
  • Chemical Storage Tanks
  • Chemical Processing Equipment
  • Chemical Reactor Vessels
  • Compressors
  • Drying Cylinders
  • Motors
  • Winders
  • Inking Machines
  • Sterilizers
  • Carborundum Abrasive Rollers
  • Pressure Vessels
  • Pie and Biscuit Formers
GENERAL SPECIFICATIONS

SPECIFICATION

ASTM / ASME SB 409

THICKNESS

4mm-100mm

WIDTH

1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc

LENGTH

2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc

SURFACE

2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc

FINISH

Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

FORM

Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.

MANUFACTURER

POSCO, Aperam, Jindal Stainless, DKC Korea, Thyssenkrupp, Baosteel, TISCO, ArcelorMittal, VDM, Nippon Metal, Outokumpu

KEY PROPERTIES OF MONEL 400 SHEETS AND PLATES
  • Monel 400 holds 67% nickel which helps in providing resistance to the metal from high corrosions. Thus, providing these sheets and plates to maintain strength in elevated temperature areas.
  • Monel 400 provides good resistance to hydrofluoric and hydrochloric acids. It helps the sheets and plates to withstand stress and pressure in alkaline solution environments. 
  • Monel 400 exhibits excellent mechanical properties from subzero temperatures up to 480 degrees celsius. Thus, enabling these sheets and plates to attain high-yield tensile strength in elevated temperature areas.
  • Monel 400 offers about the same corrosion resistance as nickel but with higher maximum working pressures and temperatures and at a lower cost due to its superior ability to be machined.
  • However, Monel 400 cannot resist nitric oxide, nitrous acid, or hypochlorites. Thus, we should not use the sheets and plates of its coatings in the environments where these elements are present.
Quality Assurance

At Mangalam Metal Corporation, all products are subject to strict supervision at each production chain, right from purchasing the raw materials to dispatching products. All the processes undergo inspections for conformity to ASTM, ASME, MSS, and JIS codes and standards.

Our Presence

Mumbai, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Delhi, Kolkata, Chennai, Bengaluru, Hyderabad, Ahmadabad, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Srinagar, Jabalpur, Asansol, Vasai Virar City, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Ranchi, Raipur, Kollam, Gwalior, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota.
Spain, Sweden, Switzerland, Saudi Arabia, Singapore, South Korea, South Africa, Afghanistan, Albania, Andorra, Austria, Bahrain, Bangladesh, Bhutan, Brunei, Belarus, Belgium, Bulgaria, Cambodia, China, Cyprus, Croatia, Czech Republic, Denmark, Estonia, Egypt, Finland, France, Germany, Greece, Georgia, Hungary, Iceland, Ireland, Italy, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Kazakhstan, Kuwait, Kyrgyzstan, Lebanon, Latvia, Latin America, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Monaco, Malaysia, Maldives, Mongolia, Myanmar (Burma), Nepal, North Korea, Netherlands, Norway, Oman, Poland, Portugal, Pakistan, Palestine, Philippines, Qatar, Russia, Romania, Russia, San Marino, Serbia and Montenegro, Slovakia, Slovenia, Sri Lanka, Syria, Taiwan, Tanzania, Tajikistan, Thailand, Turkey, Turkmenistan, Ukraine, United Kingdom, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen.

Get Free Quote

    This will close in 0 seconds

    Open chat