Pipes and Tubes are the primary products helpful in numerous engineering applications.
They are highly versatile and effective in carrying out various engineering applications, including heat tracking lines, heat exchangers, connection lines, structural supports, etc.
Monel k500 is technically an up-gradation of Monel 400 and inherits higher resistance against corrosion and fatigue. It is a precipitation-hardenable nickel-copper alloy, with the addition of aluminum and titanium alloys, which stays ductile and tough in elevated temperature areas, ranging from cryogenic to 400-Degree F.
Monel K500 provides toughness, stability, and durability to the pipes and tubes in elevated temperature areas. Also, Monel K500 is spark resistant and non-magnetic to -200-Degree F. Thus, exhibiting good thermal and electrical conductivity in hot, cold, and seawater surroundings.
Mangalam Metal Corporation is one of the globally leading distributors and exporters of Monel k500 Pipes and Tubes. We use high-quality raw materials and high-tech machinery to produce pipes and tubes to meet national and international demands.
An outsider uses the terminologies ‘pipes’ and ‘tubes’ interchangeably. However, they are different!
Pipes are round-hollow cylinders helpful to transfer liquid or gaseous fluids within the piping systems. The inner diameter is technically lesser than the outer diameter of the pipeline. Usually, an engineer selects the nominal size of the pipes by roughly calculating their fluid conveying capacity.
Mathematically, we calculate the inner diameter while subtracting the outer diameter by twice the wall thickness of the pipes, given in the schedules.
On the other hand, tubes are long-hollow cylindrical rods. They are highly versatile, making them beneficial in supporting machinery appliances and pressure equipment. They are available in 4-basic shapes, namely round, square, rectangular, and oval.
They are available in numerous shapes and sizes. Their wall thickness and outer diameter have specific schedules and are measurable in inches or millimeters.
Following are some industries and their applications where you will find our Monel k500 Pipes and Tubes installed:
- Boilers and Reboilers
- Regenerative Air Coolers
- Condensers
- Dust Collectors
- Heat Exchangers
- Chemical Storage Vessels
- Diffusive (Passive) Mixers
- Homogenizers
- Emulsifiers
- Pie and Biscuit Formers
- Tableting Equipment
- Paint Pumps
- Dispensing Machines
- Shipyard Compressors
- Vacuum Pumps
- High-Pressure Cleaners
- Electrophoresis Power Supply
- Gas Chromatography Equipment
- Liquid Nitrogen Canister
- Hybridization Incubator
- Laboratory Vacuum Pumps
| GENERAL SPECIFICATIONS | |
|---|---|
|
SPECIFICATIONS |
ASTM B 805 ASME SB 805 / ASTM B 358 ASME SB 358 / ASTM B 515 ASME SB 515 |
|
SIZE |
15″NB TO 150″NB IN |
|
SCHEDULE |
CH5, SCH 10, SCH 40, STD, SCH80, SCH160 |
|
FORM |
Round Pipes & Tubes, Square Pipes & Tubes, Rectangular Pipes & Tubes |
|
TYPE |
Seamless / ERW / EFW / Welded / Fabricated |
|
LENGTH |
Single Random, Double Random & Cut Length |
|
END |
Plain End, Beveled End, Threaded |
|
OUTER FINISH |
2B, No.1, No.4, No.8 Mirror Finish |
|
FINISH |
Annealed and Pickled, Polished, Bright Annealed, Cold Drawn |
KEY PROPERTIES OF MONEL k500 PIPES AND TUBES
- Monel k500 has approximately three times the high-yield strength of the former Monel 400, which ranges from 100ksi to 150ksi. Thus, these pipes and tubes can withstand stress and pressure without permanently deforming up to 2400-Degree F.
- Monel k500 contains 63% to 70% nickel content, with an addition of 0.25% carbon content. Hence, these pipes and tubes have inherent hardness, strength, and corrosion resistance and are certainly suitable in high-velocity sea waters.
- Monel k500 contains higher aluminum content (2.3% to 3.15%), making them non-magnetic in nature. Thus, these pipes and tubes offer good electrical and thermal conductivity in high-temperature areas, ranging from -200 Degree F to 896-Degree F.
- Monel k500 contains higher carbon content, which is approximately 0.25%. Thus, making the pipes and tube coated with this alloy highly recommendable in hydrogen sulfide or sour-gas environments.
- To fabricate Monel k500, we can use standard welding protocols. To carry on the welding process, we recommend you use the gas-tungsten-arc process. We recommend you weld Monel k500 pipes and tubes only at annealed conditions, where the temperature ranges from 1600-Degree F to 2100-Degree F.
At Mangalam Metal Corporation, all products are subject to strict supervision at each production chain, right from purchasing the raw materials to dispatching products. All the processes undergo inspections for conformity to ASTM, ASME, MSS, and JIS codes and standards.
Our Presence