Sheets and Plates are highly versatile. Sheets are the primary products in the metal industry and are helpful in numerous engineering applications.

Depending upon the nature and scope of work, we can cut or bend them in different shapes and sizes. While plates are mostly serviceable in the aviation and transportation industry, sheets are helpful to produce cans and closures.

Monel k500 is technically an up-gradation of Monel 400 and inherits higher resistance against corrosion and fatigue. It is a precipitation-hardenable nickel-copper alloy, with the addition of aluminum and titanium alloys, which stays ductile and tough in elevated temperature areas, ranging from cryogenic to 400-Degree F.

Monel K500 provides toughness, stability, and durability to the sheets and plates in elevated temperature areas. Also, Monel K500 is spark resistant and non-magnetic to -200-Degree F. Thus, exhibiting good thermal and electrical conductivity in hot, cold, and seawater surroundings.

Mangalam Metal Corporation offers an exclusive range of Monel k500 Sheets and Plates to our elite clients across the globe. We use high-quality raw materials and high-tech machinery to produce Monel k500 products to meet national and international demands.

APPLICATIONS OF k500 SHEETS AND PLATES

We often use the terms sheet, plates, and foils interchangeably. However, they are very different!

Alloy’s thicknesses are the only parameters that create the difference between Nickel 201 Sheets, Plates, and Foils. Let us read further to understand their difference more accurately:

  • The thickness of the Foils is less than 0.20mm.
  • The thickness of the Sheets ranges from 0.55mm up to 6mm.
  • The thickness of the Plates is equal to 6mm and above.

We can connect these items by general welding, soldering, or brazing methods. Due to their excellent rigidity and strength, they will not lose the shape and connectivity of their holding parts. They retain intensity at higher temperature ranges.

Following are some industries and their applications where you will find our Monel k500 Sheets and Plates beneficial.

  • Boilers and Reboilers
  • Condensers
  • Air Coolers
  • Water Treatment and Purification Equipment 
  • Absorbers
  • Carborundum Abrasive Rollers/Bowls (Abrasion peeling)
  • Pressure Vessels (Flash steam peeling)
  • Meat Grinders
  • Band Saws
  • Enrobing Machines
  • Storage Tanks
  • Demethanizers
  • C3 Neutralizer
  • Reboilers
  • Surface Condenser
  • Shell and Tube Heat Exchangers
  • Centrifugal Machines
  • Compressors
  • Hot Air Generators
  • Chemical Reactor Vessels
GENERAL SPECIFICATIONS

SPECIFICATIONS

ASTM / ASME SB 168

THICKNESS

4mm-100mm

WIDTH

1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc

LENGTH

2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc

SURFACE

2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc

FINISH

Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

FORM

Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.

MANUFACTURERS

POSCO, Aperam, Jindal Stainless, DKC Korea, Thyssenkrupp, Baosteel, TISCO, ArcelorMittal, VDM, Nippon Metal, Outokumpu.

KEY PROPERTIES OF MONEL K500 SHEETS AND PLATES
  • Monel k500 has approximately three times the high-yield strength of the former Monel 400, which ranges from 100ksi to 150ksi. Thus, these pipes and tubes can withstand stress and pressure without permanently deforming up to 2400-Degree F.
  • Monel k500 contains 63% to 70% nickel content, with an addition of 0.25% carbon content. Hence, these sheets and plates have inherent hardness, strength, and corrosion resistance and are certainly suitable in high-velocity sea waters.
  • Monel k500 contains higher aluminum content (2.3% to 3.15%), making them non-magnetic in nature. Thus, these sheets and plates offer good electrical and thermal conductivity in high-temperature areas, ranging from -200 Degree F to 896-Degree F.
  • Monel k500 contains higher carbon content, which is approximately 0.25%. Thus, making the sheets and plates coated with this alloy highly recommendable in hydrogen sulfide or sour-gas environments. 
  • To fabricate Monel k500, we can use standard welding protocols. To carry on the welding process, we recommend you use the gas-tungsten-arc process. We recommend you weld Monel k500 sheets and plates only at annealed conditions, where the temperature ranges from 1600-Degree F to 2100-Degree F.
Quality Assurance

At Mangalam Metal Corporation, all products are subject to strict supervision at each production chain, right from purchasing the raw materials to dispatching products. All the processes undergo inspections for conformity to ASTM, ASME, MSS, and JIS codes and standards.

Our Presence

Mumbai, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Delhi, Kolkata, Chennai, Bengaluru, Hyderabad, Ahmadabad, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Srinagar, Jabalpur, Asansol, Vasai Virar City, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Ranchi, Raipur, Kollam, Gwalior, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota.
Spain, Sweden, Switzerland, Saudi Arabia, Singapore, South Korea, South Africa, Afghanistan, Albania, Andorra, Austria, Bahrain, Bangladesh, Bhutan, Brunei, Belarus, Belgium, Bulgaria, Cambodia, China, Cyprus, Croatia, Czech Republic, Denmark, Estonia, Egypt, Finland, France, Germany, Greece, Georgia, Hungary, Iceland, Ireland, Italy, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Kazakhstan, Kuwait, Kyrgyzstan, Lebanon, Latvia, Latin America, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Monaco, Malaysia, Maldives, Mongolia, Myanmar (Burma), Nepal, North Korea, Netherlands, Norway, Oman, Poland, Portugal, Pakistan, Palestine, Philippines, Qatar, Russia, Romania, Russia, San Marino, Serbia and Montenegro, Slovakia, Slovenia, Sri Lanka, Syria, Taiwan, Tanzania, Tajikistan, Thailand, Turkey, Turkmenistan, Ukraine, United Kingdom, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen.

Get Free Quote

    This will close in 0 seconds

    Open chat