Monel 400 Sheets Plates

UNS N04400 Plate, DIN 2.4360 Sheets

We are Manufacturer, Supplier & Exporter of Monel 400 Sheets, Plates in India. Alloy 400 Sheets (UNS N04400) are often used in Oil and Gas Industry, such as for Pumps, Valves, Crude Petroleum stills and process vessels. Alloy 400 Plates is a nickel-copper alloy that is hardened by cold working only. After age-hardening Alloy 400 (UNS N04400) Sheets have approximately 2 to 3 times higher mechanical properties than Nickel-copper Monel 400. Our Monel 400 Chequered Plates ensure dimensional perfection. Our goods are used in a wide range of industries that demand Monel 400 Hot & Cold Rolled Plates with a high level of corrosion resistance and distinguishing hardness.

Our Monel 400 Galvanized Plates is exported to various countries worldwide. Monel 400 Sheets, Plates that are actually manufactured from High Quality of Standard Raw Materials andare designed as per with national and international standards. Alloy 400 sheets have a low coefficient of thermal expansion. UNS N04400 plates are very resistant to alkalis. WNR 2.4360 Plate can be welded, brazed and soldered. Monel 400 Plates is used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners, and heat exchangers.

Specification Of Monel 400 Sheets & Plates

Specifications ASTM B127 / ASME SB127, BS EN 10088-2, en 10028-7, IS 6911
Dimension Standard MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc
Size Range Cold rolled Plate 0.5-6.4 mm
Hot rolled Plate 3.0–10.0 mm
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness 0.3 mm to 120 mm
International Standard ASTM A480
ASTM A959
ASME IID
EN ISO 9445
EN ISO 18286
EN 10051
EN 10088-1
ISO 15510
Tolerances (width / thickness) EN 10258/ DIN 59381)
EN 10151
EN 10088
Finish 2B, 2D, BA NO (8), Cold rolled Plate (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.
Hardness Half Hard, Soft, Hard, Quarter Hard, Spring Hard
Value Added Service Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc.
Dealers & Distributor of SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material
Profiling Plasma Plate Cutting
Laser Plate Cutting
Oxy-propane Flame Cutting

Equivalent Grades

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Monel 400 2.4360 N04400 NW 4400 NA 13 МНЖМц 28-2,5-1,5 NU-30M NiCu30Fe

Chemical Composition

Grade C Mn Si S Cu Fe Ni
Monel 400 0.30 max 2.00 max 0.50 max 0.024 max 28.00 – 34.00 2.50 max 63.00 min

Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel 400 8.8 g/cm3 1350 °C (2460 °F) Psi – 80,000 , MPa – 550 Psi – 35,000 , MPa – 240 40 %


Application Industries

  • Hydrogenators
  • Lab Autoclaves
  • High Pressure Reactors
  • Agitators
  • Catalyst Filers
  • Mini Magnetic Coupling