Inconel 800 Pipes Tubes

UNS N08800 / N08810/ N08811 Pipes, DIN 1.4876 / 1.4958 / 1.4859 Pipes

We are Manufacturer & Supplier of Incoloy 800 / 800H / 800HT Pipe & Tubes in India. These Pipe Seamless / Welded are available from 1/4"(13.72mm) NB x Sch10/10s(1.65mm)  wall to 6"(168.28mm) NB x Sch40/40s(7.11mm) wall in various lengths from stock. If you do not find the size you are looking for or if you need Other Size of Pipe & Tubes please do contact us [email protected] .

Specification Of Incoloy Alloy 800/800H/800HT Pipes & Tubes

800/800H/800HT Pipes Specifications ASTM B167, B517, B163, B516 / ASME SB167, SB517, SB163, SB516
Dimensional specification ANSI/ASME B36.19M, ANSI/ASME B36.10M
ASTM B167 B163 800/800H/800HT Seamless Pipe & Tube Size 1 / 2" NB - 16" NB
ASTM B167 B163 800/800H/800HT Welded Pipe & Tube Size 1 / 2" NB - 24" NB
ASTM B517 B516 800/800H/800HT EFW Pipe & Tube Size 6" NB - 24" NB
Outside Diameter 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock
Incoloy 800/800H/800HT Pipes & Tubes Manufacturing Shapes Hydraulic, Round, Rectangle, Square, Hex, Honed
Incoloy 800/800H/800HT Pipes & Tubes Manufacturing Techniques Seamless / Welded / ERW / Fabricated / CDW / 100% X Ray Welded
Incoloy 800/800H/800HT Pipes & Tubes Schedule Thickness Range SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Incoloy 800/800H/800HT Pipes & Tubes End Types Plain End, Beveled End, Treaded One End, TBE (Treaded Both Ends)
Delivery Condition of Incoloy 800/800H/800HT Pipes & Tubes Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Surface Finish No.1, No.4, No.8 Mirror Finish, 2B
Value Added Services Cutting, Beveling, Polishing, Threading, Destructive, Non Destructive, Ultrasonic Testing
Inspection and Test Reports EN 10204 3.1, Mill Test Certificates, Chemical Reports, PMI Test Reports, Mechanical Reports, Third Party Inspection, NABL Approved Lab, Visual Inspection, Destructive Test and Non Destructive Test Reports
Marking Specification
Grade
Nominal Pipe Sizes
Pipe Schedule or Wall Thickness
Manufacturing Method (Seamless / Welded)
Heat Number
Manufacturer’s Name or Custom Logo - on request
Marked Pipe Sample: ANSI B36.19 ASTM A 312 TP 600 12" NB SCH 40S SEAMLESS HEAT NO. XXXX
Outside Finish 2B, No.4, No.1, No.8 Mirror Finish for Incoloy Pipes, Finish as per customer Requirements
Delivery Condition Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Packing of Incoloy 600 Pipes & Tubes Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests
Specials Sizes and Specifications other than above can be on request

Equivalent Grades

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20
Incoloy 800H 1.4958 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X10NiCrAlTi31-20
Incoloy 800HT 1.4859 N08811 NCF 800HT NA 15(HT) ЭИ670 - X8NiCrAlTi32-21

Chemical Composition

Grade C Mn Si Cu S Cr Ni
Incoloy 800 0.10 max 1.5 max 1.0 max 0.75 max 0.015 max 19 – 23 30 - 35
Incoloy 800H 0.05-0.10 1.5 max 1.0 max 0.75 max 0.015 max 19 – 23 30 - 35
Incoloy 800HT 0.06-0.10 1.5 max 1.0 max 0.75 max 0.015 max 19 – 23 30 - 35

Mechanical Properties

Grade Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Incoloy 800/800H/800HT 7.94 g/cm3 1385 °C (2525 °F) Psi – 75000 , MPa – 520 Psi – 30000 , MPa – 205 30 %