We are Manufacturer, Supplier & Exporter of Hastelloy B3 Bar (UNS N10675), Hastelloy B3 Rods in various sizes, dimensions and standards at market leading prices. These Round Bars are available from Stock 5 mm To 500 mm in various types as Hastelloy B3 Forged Bar, Hastelloy B3 Hex Bar, Hastelloy B3 Bright Bar, Flat Bar, Hexagonal Bar, Threaded Bar. If you do not find the size you are looking for or if you need Other Type of Round Bars please do contact us [email protected] .
Dimensions | DIN, EN, ASTM, JIS, ASME, BS, AISI |
---|---|
Standard | ASTM B335, ASME SB335 |
Hex Bar size | 2-100mm A/F |
Round bar size | Diameter: 3-~800mm |
Flat bar size | Thickness: 2 -100mm |
Width: 10 to 500mm | |
Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
Square bar size | 4 to 100mm |
Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
Rectangular Bars Section | 3.0 to 12.0mm thickness |
Threaded Bar Billet Size | 1/2 to 495mm Diameter |
Rectangles Size | 33 x 30mm to 295 x 1066mm |
Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Surface | Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline,Polished |
Condition | Hardened & tempered, annealed |
Technique | Cold Drawn, Hot Rolled, Forged Round Bar,Cold Rolled, Rod |
Processing | Bar cutting to 650mm |
Form | Rod, Round, Channel Bar, T-Bar, Flat Bar, Precision Ground Bar, Blocks, Square, Rings, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round Bar, Ingot, Billet, I/H Bar, Forging etc. |
STANDARD | WERKSTOFF NR. | UNS | JIS | EN |
Hastelloy B3 | 2.4600 | N10675 |
Grade | C | Mn | Si | W | Al | Fe | Mo | Ni | Cr | Ti |
Hastelloy B3 | 0.01 max | 3.0 max | 10 max | 3.0 max | 0.50 max | 1.5 | 28.5 | 65.0 min | 1.5 | 0.2 max |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
9.2 g/cm3 | 1370 °C (2550 °F) | Psi – 1,15,000 , MPa –760 | Psi – 52,000 , MPa – 350 | 40% |